9
Connecting a Video Device
If your video device has more than one output, select the highest quality one. DVI video has the best quality, followed by Component video, S-video, and then composite video.
If the video device uses component cable connectors, plug the cable’s green con- nectors into the green component-out connector on the video device and into the green component connector (labeled “Y”) on the projector. Plug the component cable’s blue connectors into the blue component-out connector on the video device and into the blue component connector (labeled “Pb”) on the projector. Plug the component cable’s red connectors into the red component-out connector on the video device and into the red component connector (labeled “Pr”) on the projector.
If the video device uses a round, four-prong S-video connector, plug an S-video cable into the S-video connector on the video device and into the S-videoconnector on the projector.
If the video device uses a yellow composite video connector, plug a composite video cable’s yellow connector into the video-out connector on the video device. Plug the other yellow connector into the yellow Video connector on the projector.
If the video device uses a DVI connector, plug an M1-D cable into the video-out connector on the video device. Plug the other connector into the M1-DAconnector on the projector.
