Knoll Systems HT200 user manual Modifying the DIP switch for Macintosh setting

Modifying the DIP switch (for Macintosh) setting

Modify the DIP switch setting on the MAC cable as shown below.

Macintosh adapter cable DIP switch setting (o=ON)

	MONITOR	RESOLUTION	1	2	3	4		5	6
	Multiple scan 21		o	o					o
	Multiple scan 21		o	o				o
	Multiple scan 21		o	o				o	o
	VGA/SVGA				o		o
	21 Color	1152x870	o	o	o		o
	19 Color	1024x768		o	o
	16 Color	832x624		o			o
	13 Color	640x480	o	o
Some examples of DIP switch settings:
	Inch 13	Multiple Scan 17				VGA/SVGA

Using the remote control as a computer mouse - Wireless mouse function

The supplied remote mouse receiver enables you to operate your computer's mouse functions from the remote control. It is a great way to control your computer-generated presentations.

•The cursor key on the remote control operates the computer mouse functions.

•If a Windows computer is connected, the L-CLICK button on the remote control operates as the computer mouse left click button and the R-CLICK button as the computer mouse right click button.

•If the Macintosh computer is connected, the L-CLICK and R-CLICK buttons operate in the same way as the computer mouse click button.

•While the menu is displayed on the screen (see page 18), the cursor key, L-CLICK and R- CLICK buttons will operate to control the menu.

Before connecting:

•Turn off the computer, and then remove the current mouse.

•Connect the computer and remote mouse receiver with the supplied serial mouse cable as shown in the above illustration.

•The projector and computer will be turned on as described in "Using the Projector" on page

13.Do not turn on either the computer or unit until you read this section.

•Please also refer to the manual of the computer to be connected.

12