3.Initial Settings
3.1NMEA Setting
NMEA port
1.Press the [MENU] key.
2.Press the software key labeled "CONFIGURATION".
3.Press the software key labeled "SETUP NMEA PORT1".
4.Select "FORMAT" by the arrow key.
5.Press the software key labeled "EDIT" to display the following message.
| OUTPUT FORMATNMEA 0183 | SETUP |
s FORMAT | PORT 1 | |
| VER 1. |
|
| ▲ |
|
| NMEA0183 Ver1.5 |
|
| ' NMEA0183 Ver2.0 |
|
| ▼ |
|
|
| ENTER |
DGPS 3D |
| CANCEL |
|
|
Figure 3-1 Output Format display, NMEA port
6.Select NMEA version desired by the arrow key.
7.Press the software key labeled "ENTER".
8.Press the [PLOT] key to finish.
