Disassembly
Procedure
1.Turn off the power. Wait at least one minute before opening the cover, to allow capacitors to discharge.
2.Remove nuts attached to DGPS, NMEA and power supply connectors at the rear of the display unit.
Nut
Washer | Nut |
M3 X 10 (10pcs.)
WARNING
Do not connect the power cable with the cover removed.
Connector gasket
Figure 4-1 Removing cover assembly
3.Remove nut and washer attached to ANT connector.
4.Remove ten screws at rear of the display unit to detach panel/chassis assem- bly from the cover assembly.
