3.2 Output Data Sentences
Select output data sentences for external equipment as follows:.
1.Press the [MENU] key.
2.Press the software key labeled "CONFIGURATION".
3.Press the software key labeled "SETUP NMEA PORT 1".
4.Press the software key labeled "SELECT SNTNC." to display the following list.
| SELECT SENTENCE | SELECT | ||
s | SNTNC. | |||
sAAM |
| |||
|
| |||
|
|
| ||
| APB | ON | ON/OFF | |
| BOD |
| ||
|
|
| ||
| BWR |
|
| |
| GGA |
|
| |
| GLL | ON |
| |
| MTW |
|
| |
| RMA |
|
| |
| RMB | ON |
| |
| RMC | ON |
| |
| VTG | ON |
| |
| WPL |
|
| |
| XTE |
|
| |
| ZDA | ON |
| |
DGPS 3D |
|
| RETURN | |
|
|
| ||
Figure 3-3 Output Data Sentences Display
5.Select data sentence you want to output by the arrow key.
6.Press the software key labeled "ON/OFF". To output data, set to "ON".
7.Repeat to select other sentences.
8.Press the software key labeled "RETURN".
9.Press the [PLOT] key to finish.
Input/Output data sentences
Port | I/O |
| Format | Data | Remarks |
|
|
|
|
|
|
|
| • |
| WPL : GP talker only | |
| Input | TLL*1, DWM, WPL*1, DBT/DPT | NMEA Ver 1.5: DBT | ||
|
|
| Ver. 2.0 |
| NMEA Ver 2.0: DPT |
1 |
|
| Ver. 1.5 |
|
|
|
| AAM, APB, BOD, BWC/BWR, | GREAT CIRCLE: BWC | ||
|
| • | IEC1162 | ||
| Output |
|
| GGA, GLL, RMA, RMB, RMC, VTG, | RHUMB LINE: BWR |
|
|
|
| WPL, XTE, ZDA, MTW, GTD*2 |
|
|
|
|
|
|
|
|
| • |
| WPL: GP talker only | |
| Input | TLL*1, DWM, WPL*1, DBT/DPT | NMEA Ver 1.5: DBT | ||
|
| Ver. 2.0 | |||
|
|
|
| NMEA Ver 2.0: DPT | |
|
|
| Ver. 1.5 |
| |
2 |
|
|
|
| |
| • | RS232C | AAM, APB, BOD, BWC/BWR, | GREAT CIRCLE: BWC | |
|
| ||||
|
| • | RTCM104 | ||
| Output | GGA, GLL, RMA, RMB, RMC, VTG, | |||
|
|
| RHUMB LINE: BWR | ||
|
|
|
| WPL, XTE, ZDA, MTW, GTD*2 | |
|
|
|
|
| |
|
|
|
|
|
|
*1: Cannot be input consecutively.
*2: Output automatically when LC or LA is selected.
