![](/images/new-backgrounds/1169423/16942317x1.webp)
Connecting Component Video Equipment withYCbCr output jacks to the RGB IN connector
You can also connect the video component to the RGB IN connector, if the video component has the component video (YCbCr) signal jacks. This connection may provide a better picture quality than the connections on page 8.
• You can switch the input source to VIDEO,
• The AUDIO IN jack is for equipment connected to the RGB IN connector.
Before connecting
• Turn off the components that are to be connected.
• The projector and computer will be turned on in "Using the Projector". Do not turn on either the computer or unit until you read this section.
• Please also refer to the manual of the video component to be connected.
If you are connecting a 5 wire BNC cable to a 15 pin
The remaining black and gray BNC connectors are not used in this case. When initially displaying component video the color may require adjustment. To adjust the color, using the remote to the “Image Adjust Menu” and adjust the “Hue” Cr and Cb (red and blue) as required.
.
9