Kobe Range Hoods CH2236SQ, CH2230SQ Safety Warning, Wiring to Power Supply

Wiring to Power Supply

SAFETY WARNING

RISK OF ELECTRICAL SHOCK. THIS RANGE HOOD MUST BE PROPERLY GROUNDED. MAKE SURE THIS IS DONE BY SPECIALIZED ELECTRICIAN IN ACCORDANCE WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL CODES. BEFORE CONNECTING WIRES, SWITCH POWER OFF AT SERVICE PANEL AND LOCK SERVICE PANEL TO PREVENT POWER FROM BEING SWITCHED ON ACCIDENTALLY.

1.Connect the electrical wires.

-If necessary to hide the electrical wire connections, push wires back into the wiring box. Access the wire connections underneath the hood by removing the bottom casing from the six screws. Before reattaching the bottom casing, make sure wires do not slip between motors, impellers, or any moving parts to prevent any damage.

-Connect three wires (black, white and green) to house wires and cap with wire connectors.

-Connect according to color: black to black, white to white, and green to green.

-Test the operation of the hood before moving on to the next step. Make sure power is supplied to the hood.

Install Accessories

1.Place the oil container (round) into keyhole under each safety screen. Turn clock-wise until firmly in place. Refer to Figure 30.

2.Slide oil container (oval) into plastic slot behind each safety screen as shown in Figure 31.

Figure 30 Figure 31

Final Assembly

1.Turn power ON in control panel. Check all lights and fan operation.

2.Make sure to leave this manual for the homeowner.

16