7.Connect the electrical wires.
-If necessary to hide the electrical wire connections, push wires back into t Access the wire connections underneath the hood by removing the bottom casing the six screws. Before reattaching the bottom casing, make sure wires do not between motors, impellers, or any moving parts to prevent any damage. Connec wires (black, white and green) to house wires and cap with wire connectors.
-Connect according to color: black to black, white to white, and green to gr
-Test the operation of the hood before moving on to next step. Make sure pow supplied to the hood.
Install Accessories
8.Place the oil container (round) into keyhole under each safety screen. Turn c until firmly in place. Refer to Figure 6.
9.Slide oil container (oval) into plastic slot behind each safety screen. Refer
Figure 6
Final Assembly
10.Turn power ON in control panel. Check all lights and fan operation.
11.Make sure to leave this manual for the homeowner.
7
