Kodak 1H9659 Installing the Software

Calibration Utility for MICROSOFT WINDOWS

1–2 September 1997 Part No. 1H9659

Installing the Software

This section describes how to install the Calibration Utility. Follow the

steps for your particular Windows system.

Windows 3.1x

1. Place the Calibration Utility CD or diskette in the appropriate drive.

2. Open and read the

readme.wri

file (which contains last-minute

changes and information).

3. Open the Program Manager window.

4. Pull down the File menu and select

Run

5. Type d:\setup <enter>.

NOTE: Replace “d” in the above command with the appropriate drive

letter, if necessary.

IMPORTANT:

Other executable files are on the disk (_mssetup.exe

and _mstest.exe). If you run either of these programs,

you will not be able to install the Calibration Utility.

The installation begins. Follow the instructions that appear on the

screen. When the installation is complete, a confirmation box appears.

6. Click on the

Continue

button.

Windows restarts. A new group named Kodak Calibration Utility

appears in the Program Manager window.

7. Remove the CD or diskette from the drive.

Windows 95

1. Place the Calibration Utility CD or diskette in the appropriate drive.

2. Open and read the

readme.wri

file (which contains last-minute

changes and information).

3. Double-click on the

My Computer

icon.

4. Double-click on the appropriate drive.

5. Double-click on the

setup.exe