Calibration Utility for MICROSOFT WINDOWS
1–38 September 1997 Part No. 1H9659
4. Use the Linearity Reference Card to select a box number for each of
the six density ranges.
If all of the Visual Linearity numbers on the test print are box number 5,
the printer is already calibrated. You can close the Calibration Utility.
If the Visual Linearity numbers on the test print are not all box number 5,
you must recalibrate the printer. Go to step 5.
5. Click on the
Input
button.
The Input Test Print Values dialog box opens.
6. Type in the values you select from the test print in the text boxes.
7. Click on the
Recompute the Table
button.
The calibration table is computed using the specified values and the
Calibration Document window appears.
8. Click on the
Send
button to send the table to the printer.