Calibration Utility for MACINTOSH
2–47
Part No. 1H9659 September 1997
Starting Point
The
Starting Point
box allows you to select the data that will act as a
base for the new calibration table.
Read Current Table From Printer—allows you to retrieve and begin
with the printer’s current table. Once the table is loaded, you can edit
it and recalibrate the printer. This option is not always available as a
starting point.
Use Printer’s Default Table—default printer data acts as the starting
point for the new calibration document.
Copy Table from File—the calibration table you select with the
Select
File
button acts as the starting point for the new calibration document.
Select File—opens a selection box so you can choose an existing
calibration document from which to start.
OK
The
OK
button closes the dialog box and opens the Calibration
Document window. Refer to “Calibration Document Window”
on page 1–48 for more information.
Cancel
The
Cancel
button closes the dialog box without creating a new
calibration document.