Kodak C110 manual Troubleshooting, Basic troubleshooting, photo paper, page

7

Troubleshooting

Basic troubleshooting

Some problems can be resolved quickly by power cycling the printer: Turn off your printer. Wait five seconds. Turn on the printer.

	Use the following information to help troubleshoot problems with your printer.
Problem				Possible Solutions
Printer does not	• Make sure you are using the power cord that came with your printer.
power on
	• Make sure that the power cord is connected to the AC adapter, the power cord is
		plugged into an outlet or power strip, and the LED on the AC adapter is lit.
Printer not detected	• Make sure your printer is plugged in and turned on.
	• If you are using a USB cable, make sure that:
			– it is a USB 2.0 high-speed cable.
			– it is connected to both your printer and your computer.
			– you restart the computer if the USB cable was disconnected from the printer
			then reconnected, or if power to the printer was interrupted.
Carriage jam	• Open the printer access door and clear any obstructions.
	• Check that the printhead and ink cartridges are installed correctly.
		(The printhead and ink cartridges are installed correctly when you hear them click
		into place.)
Print quality	• For best results, use paper with the COLORLOK Technology logo on the package.
	• Make sure the paper is loaded correctly. See Loading paper, page 7 and Loading
		photo paper, page 9.
	•	Clean the printhead:
		–	Press Home.
		–	Press	to select Maintenance, then press OK.
		–	Press	to select Clean Printhead, then press OK.
	•	Calibrate the printer:
		–	Press Home.
		–	Press	to select Maintenance, then press OK.
		–	Press	to select Calibrate Printer, then press OK.
	• For more help, go to www.kodak.com/go/espc110support, then type missing
		colors, blank prints, or other problem in the search field.
Ink cartridge	• Check that KODAK Ink Cartridge(s) are installed. Do not use non-Kodak brand or
		refilled ink cartridges.
	• Remove, then install the cartridges again. Make sure the cartridges click into place.
				www.kodak.com/go/aiosupport	53