Kodak C122 manual Picture quality problems, Direct printing Pictbridge enabled printer problems

Troubleshooting

Picture quality problems

Status	Solution
Picture is not clear	■ Clean the lens (see page 42).
	■ Place the camera on a flat, steady surface or use a tripod (especially
	in low light).
	■ Use a larger picture size (see page 27).
	■ If you’re manually adjusting the ISO speed, realize that a high ISO
	setting may cause grainy pictures (see page 28).
Picture is too dark	■ Reposition the camera for more available light.
	■ Use Fill flash (see page 7) or change your position so light is not
	behind the subject.
	■ Move so that the distance between you and the subject is within the
	effective flash range. (See Camera Specifications starting on
	page 40.)
Picture is too light	■ Reposition the camera to reduce the amount of available light.
	■ Turn the flash off (see page 7).
	■ Move so that the distance between you and the subject is within the
	effective flash range. (See Camera Specifications starting on
	page 40.)
Direct printing (PICTBRIDGE enabled printer) problems

Status	Solution
Cannot find the	■ Use the Direct printing menu to change the image storage location.
desired picture
The Direct printing	■ Press any camera button to redisplay the menu.
menu interface turns
off

Cannot print pictures ■ Make sure there is a connection between the camera and the printer (see page 32).

■Make sure the printer and the camera have power.

38 www.kodak.com/go/support