Troubleshooting
www.kodak.com/go/support 43
Picture quality problemsStatus Solution
Picture is not clear ■To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■Clean the lens (see page47).
■Make sure the camera is not in Macro mode (see page32).
■Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
■Use a larger picture size (see page30).
■If you’re manually adjusting the ISO speed, realize that a high ISO
setting may cause grainy pictures (see page31).
Picture is too dark ■Reposition the camera for more available light.
■Use Fill flash (see page8 ) or change your position so light is not
behind the subject.
■Move so that the distance between you and the subject is within the
effective flash range. (See Specifications starting on page45.)
■To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■In Program mode, adjust the Exposure Compensation (see page31).
Picture is too light ■Reposition the camera to reduce the amount of available light.
■Turn the flash off (see page8).
■Move so that the distance between you and the subject is within the
effective flash range. (See Specifications starting on page45.)
■To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■In Program mode, adjust the Exposure Compensation (see page31).