8
3.Press the SELECT BUTTON (40) to
activate the “blinking digits” of the
selected date or time format.
4.Move the ZOOM-DIAL LEVER (1) to the
right or left to increase or decrease
the number or press the select button
to increase the number.
5.Press the ENTER BUTTON (39) to store
the information and to actuate the next
“blinking digits” (follow steps 4 through
5 to complete your selection or press
the enter button again to end the
session).
•After you set the date or time, the
LCD panel displays

“DATE IS”

or

“TIME IS”

followed by the selected
date or time.
ATTACHING THE STRAP
1.Insert the
shorter looped
end of the
strap behind the
STRAP POST (10).
2.Thread the
longer end of
the strap
through the
shorter loop.
3.Pull the
strap tight.

Control-button actuator

Use the knob on the clasp of the camera
strap to actuate the small control buttons
on the camera.