Kodak C875 manual Using the flash

Doing more with your camera

Using the flash

Press the flash button repeatedly to change flash modes.

The flash mode appears in the LCD screen.

NOTE: Flash settings are preset for each picture-taking mode and are not available in all Capture or SCN modes. When you change to Auto or Red-eye in some of these modes, it becomes the default until you change it.

Flash mode	Description
Auto Flash	The flash fires when the lighting conditions require it.
Fill	The flash fires every time you take a picture, regardless of the lighting
	conditions. Use when the subject is in shadow or is “backlit” (when
	light is behind the subject). In low light, hold the camera steady or use
	a tripod.
Red Eye	The camera automatically detects and removes red eye from the
	picture. (For Red Eye Preflash, see page 38.)
	IMPORTANT: When the flash is set to Red Eye, the camera
	cannot take more than 2 pictures in quick
	succession. Take more pictures when the Ready
	light turns green.
Off	The flash never fires.
Flash-to-subject distances
Wide angle	2–13.5 ft (0.6–4.1 m) @ ISO 200
Telephoto	2–8.5 ft (0.6–2.6 m) @ ISO 200
www.kodak.com/go/support		21