CONVERTING TO THE KODAK EKTACOLOR PROCESSING CARTRIDGE 111
To convert to the KODAK EKTACOLOR Processing Cartridge 111, simply load the cartridge, and let it mix as usual on top of existing solutions. Use KODAK Rinse Tablets in the same way as FUJI FSC100 Super Conditioner Tablets. If you are converting from a FUJI
At the time of the conversion from other chemicals to the KODAK EKTACOLOR Processing Cartridge 111, you may encounter process control biases using KODAK Control Strips and the aims described on page 7. For example, the LD may be low by as much as
This bias is explained by slight differences in the formulations of the previous product and the EKTACOLOR Processing Cartridge 111. As the KODAK Chemicals and Paper season into the processor, the low plots will recover closer to the aim values. The printer will calibrate to follow the process shift, and there will be no impact on the picture quality. Depending on the rate of chemical use, it may take several weeks for the full impact of the shift.
For smaller models of FUJI and NORITSU Digital Minilabs, such as the FRONTIER 330 or the NORITSU 3501/3502F, it will take approximately 6 cartridges to fully season the tank solutions with KODAK Chemicals and Paper. For models with larger tank sizes, such as FRONTIER 390 Digital Minilab, it may take up to
30 cartridges to fully season these..
When your processor needs a new cartridge, simply mount the EKTACOLOR Processing Cartridge 111 on the machine, and let it mix as usual. Use KODAK Rinse Tablets in the same way as FUJI FSC100 Super Conditioner Tablets.
FUJI FRONTIER 330,350,355, 370, 395, and 390
CP-48S
Processing Cartridge 111
|
|
| Developer |
|
| |||||||
|
|
|
| Concentrate |
| Concentrate | ||||||
|
|
| Concentrate |
|
| |||||||
|
|
|
| Part A |
|
| Part B | |||||
|
|
|
|
|
|
|
|
| ||||
Replenishment Rate |
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| |||
mL/m2 |
|
|
| 45 |
| 35 | (Combined) |
| ||||
|
|
Process Cycle with
KODAK EKTACOLOR Processing Cartridge 111
KODAK Rinse
Tablets
& Water
175 (121
Time (sec)
Temperature
C (F)
Developer |
| ||
P1 |
| P2 | |
0:45 |
|
|
|
|
| 0:45 | |
38.5 +/- 0.3 |
|
| 38.0 +/- 2.0 |
(101.3 +/- 0.5) |
|
| (100.0 +/- 2.0) |
|
|
|
|
Super
Rinse
PS1
Super Super
Rinse Rinse
PS2 PS3
1:30 Combined Time All Super Rinse Tanks
Super
Rinse Dry 2.
PS4
1.The P2
2.Typical is 50 - 60 C (122 - 140 F).
2 Using the KODAK EKTACOLOR Processing Cartridge 111 With Digital Minilabs,