Chapter 5
Turning Off Quickview
After you take a picture, Quickview displays it on the LCD for 5 seconds (see page 17). The default setting is on. To save battery power, turn off Quickview:
1In Capture or Review mode, press the Menu button.
2Highlight Setup 
, then press the OK button.
3Highlight Quickview 
, then press the OK button.
4Highlight Off, then press the OK button.
5Press the Menu button to turn off the menu.
The picture is not automatically displayed on the LCD after you take it. To see the picture, press the Review button.
This setting remains until you change it.
Turning On Liveview
The Liveview feature displays a live image on the LCD so you can frame your picture in the LCD instead of the Viewfinder (see page 16). The default setting is Off, which means that you must press the OK button to see the live image.
IMPORTANT: Liveview quickly depletes battery power; use it sparingly.
Turn on Liveview:
1In Capture or Review mode, press the Menu button.
2Highlight Setup 
, then press the OK button.
3Highlight Liveview 
, then press the OK button.
4Highlight On, then press the OK button.
The live image is displayed whenever the camera is on. Liveview automatically turns off after one minute to conserve battery power. You can manually turn it back on by pressing the OK button.
5Press the Menu button to turn off the menu. This setting remains until you change it.
43
