Battery Indicators

Power

Busy

Memory

The green Power light, on the back of the DC25, blinks to indicate that the battery is weak and in need of replacement.

You may also check the battery level from the STATUS display on the LCD. See the LCD section of this chapter entitled Checking Camera Status for instructions on accessing the STATUS display.

The DC25 may unexpectedly power off if the batteries have reached a low point and the batteries will need to be replaced. If the batteries should go dead while pictures are stored in the camera’s memory or Picture Card, the pictures remain stored in the camera.

Resolution Mode

You may set your DC25 to capture pictures in a High or Standard resolution. Your pictures include more detail with high resolution, but they will use more memory in the DC25 than standard resolution pictures.

OFF AUTO FILL

High— you can take approximately 14 pictures at 493 X 373 pixels.

STANDARD HIGH

ERASE

POWER

KODAK DC25 DIGITAL CAMERA

 

Standard— you can take

 

 

 

 

approximately 29 pictures at

Resolution switch

 

320 X 240 pixels.

You can switch freely between the two settings when taking pictures. The number of pictures the DC25 is able to store will vary accordingly.

2-2

Page 12
Image 12
Kodak DC25 manual Resolution Mode, Battery Indicators, Resolution switch