Printing
24 www.kodak.com/go/aiosupport
Using default settings to print a picture
To print a picture from a memory card using the factory default settings:
1. Load photo paper (short side first) into the center of the input tray with the
glossy side toward you (see Loading photo paper, page 18), and move the
paper-edge guides until they touch the paper.
IMPORTANT: Always load the paper short side first. The printer automatically detects
the orientation of the picture, whether it’s portrait or landscape, and prints
accordingly. If the photo paper is loaded in the wrong direction, the image
will be cut off and the paper may jam. If the paper is loaded with the wrong
side up, the image quality will be affected.
2. Insert the memory card into the memory card slot.
3. Press or to display the picture you want to print.
4. Press Start to begin printing.
The printer prints one 4 x 6 in. / 10 x 15 cm picture.
IMPORTANT: To prevent loss of data from your memory card, do not remove it from the
printer while printing.
memory card slot