Kodak GE1900C user manual Item 4 Mini-SMB Sync Out, Item 5 Status LED, Item 6 Status LED

GE1900 User Manual 70-0028A-A

Item 4: Mini-SMB Sync Out 1

This Mini-SMB port on the camera uses an Amphenol 903-406J-51R connector. A suitable mating cable connector is Amp 413985-3 which can be used with RG174 coaxial cable. Contact Prosilica to purchase cabling.

This connector is particularly useful for triggering multiple cameras in a “daisy chain” fashion.

The Sync Out 1 signal can be configured as follows:

Exposing	Corresponds to when camera is
	integrating light.
Trigger Ready	Indicates when the camera will accept a
	trigger signal.
Trigger Input	A relay of the trigger input signal used
	to “daisy chain” the trigger signal for
	multiple cameras.
Readout	Valid when camera is reading out data.
Strobe	Programmable pulse based on one of the
	above events.
Imaging	Valid when camera is exposing or
	reading out.
GPO	User programmable binary output.

Any of the above signals can be set for active high or active low.

Item 5: Status LED 1
LED COLOR	STATUS
Solid Green	Ethernet link established.
Flashing Green	Ethernet activity.
Item 6: Status LED 2
LED COLOR	STATUS
Solid Green	Normal operation.
Solid Orange	Firmware missing.
Flashing Orange	Camera fault.

Prosilica Inc. 8