Kodak i100 Series manual OK  saves the values set on all tabs

Buttons on the Kodak Scanner Properties dialog box

Following are descriptions of the buttons located at the bottom of the dialog box.

Defaults  when you select Defaults, the message Reset all values to factory defaults? will be displayed. Clicking Yes will reset all values on all tabs to the factory default settings.

Copy  will copy the settings of the front camera to the rear camera for the selected camera (bi-tonal, color or grayscale). For example, if you have Front Bi-tonalcamera highlighted, these values will be copied to the Rear Bi-tonal camera. If you have the Front Color camera highlighted, these values will be copied to the Rear Color camera.

OK  saves the values set on all tabs.

Cancel  closes the dialog box without saving any changes.

A-61517 October 2004 3-5