![Camera settings area](/images/new-backgrounds/109620/109620121x1.webp)
Camera settings area | The selections in the Camera area list the available sides (front and | |
| back) of an image where you can define individual image processing | |
| values. Options include: Front Color, Front Binary, Back Color and Back | |
| Binary. For more information about the Camera selections see the | |
| section entitled, “Image outputs” in Chapter 1. | |
| When starting the configuration process, use the steps below as a | |
| guide: | |
| 1. | Check the images you wish to capture (Enable camera settings). |
| 2. | Select the order to transfer the images (Define Transfer Order). |
| 3. | Configure each image by highlighting it (Configure). |
Enable camera settings select the desired checkbox to enable the Front Color, Front Binary, Back Color or Back Binary settings as desired. This indicates the images you wish to capture and transfer to the host. (It is possible to capture only rear images.) You can enable your selection by putting a checkmark in the desired box.
Define Transfer Order define the transfer order by selecting the Color First or Binary First radio button. This determines which image is transferred to the host first when using simultaneous output scanning. For example, if you are scanning front color and front binary and you select Binary First the scanner will return the front binary image, then the front color image.
Configure highlight the image you want to setup. As you select the image, other options will become available on the Scanner Settings dialog box. The availability of these options is dependent upon the selection you make.
For example, Front Color is highlighted in the example at the left.
Convert Color to Grayscale this option is only available when configuring color cameras. When selected, the scanner will convert the color image data to grayscale before making it available to the host.