Kodak M1093 IS manual Care and maintenance, Video output-NTSC or PAL PictBridge support-Yes

Appendix

Exposure compensation—+/-2.0 EV with 1/3 EV step

Burst mode—Maximum 3 pictures @ 1.5 fps; Auto Exposure, Auto Focus, Auto White Balance executed for first shot only

Communication with computer—USB 2.0 high speed (PIMA 15740 protocol); via USB cable model U-8; EasyShare camera dock, printer dock, or HDTV dock

Video output—NTSC or PAL

PictBridge support—Yes

Power—Kodak Li-Ion rechargeable digital camera battery KLIC-7004; 5V AC adapter; EasyShare camera dock, printer dock, or HDTV dock

Size—3.7 x 2.3 x 0.8 in. (95.2 x 58.5 x 21.4 mm) @ power off

Weight—4.4 oz (126 g) without card or battery

Operating temperature—32–104°F (0–40°C)

Tripod mount—1/4 inch

Care and maintenance

■If you suspect water has gotten inside the camera, remove the battery and card. Allow all components to air-dry for at least 24 hours before using the camera.

■Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft, lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions unless designed specifically for camera lenses. Do not allow chemicals, such as suntan lotion, to contact painted surfaces.

■Service agreements may be available in your country. Contact a dealer of Kodak products for more information.

■For digital camera disposal or recycling information, contact your local authorities. In the US, visit the Electronics Industry Alliance Web site at www.eiae.org or www.kodak.com/go/m1093support

54 www.kodak.com/go/support