Kodak M1093 IS manual When removing the battery, allow it to cool it may be hot

Appendix

Upgrading your software and firmware

Download the latest versions of the software included on the Kodak EasyShare software CD and the camera firmware (the software that runs on the camera). Visit www.kodak.com/go/m1093downloads.

Storage capacities

The LCD displays the approximate number of pictures (or minutes/seconds of video) remaining. For average SD card capacities, visit www.kodak.com/go/SDcapacities. Actual storage capacity varies depending on subject composition, card size, and other factors. You may be able to store more or fewer pictures and videos. Favorites take up additional space in internal memory.

Important safety instructions

CAUTION:

Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to qualified service personnel. Kodak AC adapters and battery chargers are intended for indoor use only. The use of controls, adjustments, or procedures other than those specified herein may result in exposure to shock and/or electrical or mechanical hazards. If the LCD breaks, do not touch the glass or liquid. Contact Kodak customer support.

■The use of an accessory that is not recommended by Kodak may cause fire, electric shock, or injury. For approved accessories, visit www.kodak/go/accessories.

■Use only a USB-certified computer equipped with a current-limiting motherboard. Contact your computer manufacturer if you have questions.

■If using this product in an airplane, observe all instructions of the airline.

■When removing the battery, allow it to cool; it may be hot.

■Follow all warnings and instructions supplied by the battery manufacturer.

■Use only batteries approved for this product to avoid risk of explosion.

www.kodak.com/go/support 55