Kodak M1093 IS manual Computer/connectivity problems, StatusSolution

Troubleshooting

Status	Solution
Battery life is short	■ Make sure the correct battery type is installed (see page 56).
	■ Wipe the contacts with a clean, dry cloth before inserting a
	battery in the camera.
	■ Insert a new or charged battery (see page 1).

You cannot take a picture

■Turn the camera off, then on again.

■Depress the Shutter button all the way (see page 5).

■Insert a new or charged battery (see page 1).

■Memory is full. Transfer pictures to the computer (see page 37), delete pictures (see page 14), or insert another card.

Error message appears	■ Turn the camera off, then on again.
on LCD	■ Remove the memory card.
	■ Turn off the camera. Remove the battery. Wipe the contacts with
	a clean, dry cloth.
	■ Insert a new or charged battery.
	■ If the problem still exists, get help (see page 49).
Memory card not	■ Card may be corrupted. Format the card in the camera (see
recognized or camera	page 34).
freezes with card	■ Use another memory card. Only SD or SDHC cards are supported.
Cannot find the	■ To view pictures on a card or in internal memory, see page 13.
desired picture/video

Computer/connectivity problems

StatusSolution

Pictures do not ■ See Help in EasyShare software. transfer to computer

Slide Show does not run on an external video device

■Adjust the camera Video Out setting to NTSC or PAL (see page 33).

■Make sure the external device settings are correct. (See the device’s user’s guide).

46 www.kodak.com/go/support