Kodak M1093 IS manual Direct printing PictBridge enabled printer problems, Turn the flash off see

Troubleshooting

Status	Solution
Picture is too light	■ Reposition the camera to reduce the amount of available light.
	■ Turn the flash off (see page 7).
	■ Move so that the distance between you and the subject is within the
	effective flash range. (See camera specifications starting on
	page 52.)
	■ To automatically set exposure and focus, press the Shutter button
	halfway. When the framing marks turn green, press the Shutter
	button completely down to take the picture.
	■ In Program and Panorama modes, adjust the Exposure
	Compensation (see page 27).
Direct printing (PictBridge enabled printer) problems
Status	Solution
Cannot find the	■ Use the Direct printing menu to change the image storage location.
desired picture
The Direct printing	■ Press any camera button to redisplay the menu.
menu interface turns
off

Cannot print pictures ■ Make sure there is a connection between the camera and the printer (see page 39).

■Make sure the printer and the camera have power.

Camera or printer ■ Follow the prompts to resolve the issue. display an error

message

48 www.kodak.com/go/support