Installing software and connecting to a computer
www.kodak.com/go/support 21
Connecting to a computer
A USB cable is required to connect to a computer. Use the USB cable that
came with your Kodak EasyShare camera. To purchase one separately, see a
retailer of Kodak products, or visit www.kodak.com/go/accessories.
IMPORTANT:
Make sure your camera is NOT in the printer dock when you are
connecting to the computer.
1Make sure the power is connected to the printer dock (see page3), and
Kodak EasyShare software is installed on the computer (see page18).
2Plug the labeled end of a USB cable into
the labeled USB port on your computer. See
your computer documentation for details.
3Plug the other end of the USB cable into the
square USB connector on the back of the
printer dock.