Getting started

If your router supports Wi-Fi Protected Setup (WPS)

After you choose your network, the WPS screen appears.

Press the WPS button on your router to automatically connect to your wireless network.

If your network is secure, touch Specify security code, then enter the security code for your network. If you do not know your security code, ask the person who set up your network.

If a PIN is required for your network, touch Advanced PIN, then enter your PIN. (The PIN is commonly found on the router itself). If you do not know your PIN, ask the person who set up your network.

To open the network setup wizard later

Health Check button

1On the back of the frame, press the Health Check button.

2On the touch screen, after the network status check is complete, touch Network.

NOTE: You can also touch Fix it if it is displayed. If you do this, follow the on-screen instructions.

6

www.kodak.com/go/support

Page 12
Image 12
Kodak S710 If your router supports Wi-Fi Protected Setup WPS, On the back of the frame, press the Health Check button