Additional Information
Screen Saver
The screen saver picture appears when you leave the DVD Player in stop mode for about five minutes.
After the Screen Saver has been engaged for about five minutes, the DVD Player will automatically turn itself off.
Dimmer Function
You can adjust the Display Window’s brightness in
3 steps. Each press of the FL DIM button changes the Display Window’s brightness in the following order:
Normal → Dim → Display Off
System Select
You must select the appropriate system mode for your TV system. If NO DISC appears in the display window, press and hold PAUSE on the front panel for more than 5 seconds to be able to select a system (PAL, NTSC, or AUTO).
•When the selected system does not coincide with the system of your TV, normal color picture may not be displayed.
AUTO: Select when DVD player is connected with Multi system TV.
NTSC: Select when DVD player is connected with
PAL: Select when DVD player is connected with
Video Mode Setting
zWith certain discs, the playback picture may be flick- ering or Dot Crawl is shown on straight lines. That means Vertical interpolation or
zTo change the video mode, press and hold DISPLAY about 3 seconds during disc playback. The new video mode number selected is displayed on the TV screen. Check whether the video quality has improved. If not, repeat the above procedure until pic- ture quality is improved.
zVideo mode sequence:
Auto → Film → Video → Auto
zIf you turn off the power, the video mode will return to initial default state (Auto).
Detailed Description of each Video Mode
Auto : The source material of the DVD video (film material or video material) is determined from disc information.
Film : Suitable for playing film based content or video based material recorded by the progressive scan method.
Video : Suitable for playing video based content with comparatively little motion.
Note
The video mode setting only works when the Progressive Scan mode is set to “On” on the setup menu.
