Before Operation (Continued)
Sound
Digital Audio Output
Each DVD disc has a variety of audio output options. Set the player’s Digital Audio Output according to the type of audio system you use.
DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM” if you connected the DVD Player’s DIGITAL OUT jack to a Dolby Digital decoder (or an amplifier or other equip- ment with a Dolby Digital decoder).
Stream/PCM: Select “Stream/PCM” if you connected the DVD Player’s DIGITAL OUT jack to an amplifier or other equipment with a DTS decoder, Dolby Digital decoder or MPEG decoder.
If you like to have DTS sounds from the digital output jack, you have to select “Stream/PCM”.
PCM: Select when connected to a
Disc Audio | DIGITALDOLBY /PCM |
Disc Subtitle | Stream/PCM |
Disc Menu | PCM |
Rating
Area Code
Sample Freq.
TV Aspect
48 KHz
Menu Language
96KHz
Progressive Scan
Digital Audio Output
5.1Speaker Setup Others
Sample Frequency
To change the Sample Frequency setting, first select the desired Digital Audio Output as indicated as above.
(1)If your receiver or amplifier is NOT capable of handling 96KHz signals, loud buzzing sounds might be heard. In this case, select 48 KHz.
When this choice is made, this unit will automatically convert any 96KHz signals to 48KHz so your system can decode them.
(2)If your receiver or amplifier is capable of handling 96KHz signals, select 96KHz. When this choice is made, this unit will pass each type of signal through without any further processing.
5.1 Speaker settings DVD-V DVD-A
Select speaker settings, including volume balance and delay time, or test the speaker settings.
Speaker settings are only active on the Analog Multi- Channel Output. (See “Speaker Settings”, page 27.)
Disc Audio
Disc Subtitle
Disc Menu | R |
|
| R |
Front L |
| |||
Rating |
| |||
Country Code | Volume | 0 dB | ||
| Size | Large | ||
TV Aspect | ||||
Menu Language | Distance | 1 ft | ||
Progressive Scan | Test |
| ||
Digital Audio Output | Return |
| ||
5.1 Speaker Setup |
|
|
|
|
|
|
|
|
|
Others |
|
|
|
|
