Select Advanced USB Storage Advanced Settings | NETGEAR C6300

AC1750 WiFi Cable Modem Router

4.Select ADVANCED > USB Storage > Advanced Settings.

5.Specify access to the USB storage device:

•Network Device Name. This is the name used to access the USB device connected to the modem router. The default is readyshare.

•Workgroup. If you are using a Windows workgroup rather than a domain, the workgroup name is displayed here. The name works only in an operating system that supports NetBIOS, such as Microsoft Windows.

•Access Method. Select the access methods:

-Network Neighborhood/MacShare. Enabled by default.

-HTTP. Enabled by default. You can type http://readyshare.routerlogin.net/shares to access the USB drive.

-HTTP (via Internet). Disabled by default. If you enable this feature, remote users can type http://<public IP address/shares> (for example, http://1.1.10.102/shares) or a URL domain name to access the USB drive over the Internet. This feature supports file uploading only.

-FTP. Enabled by default.

-FTP (via Internet). Disabled by default. If you select this check box, remote users can access the USB drive through FTP over the Internet. This feature supports both downloading and uploading of files.

6.Click the Apply button. Your changes are saved.

Share a USB Drive Attached to the Modem Router

36

Image 36

NETGEAR C6300 user manual Select Advanced USB Storage Advanced Settings, Network Neighborhood/MacShare. Enabled by default

Contents

AC1750 WiFi Cable Modem Router Support ComplianceTrademarks Contents Specify Network Settings Appendix a Supplemental Information Hardware Setup Unpack Your Modem Router Front Panel LED Rear Panel Position Your Modem Router Retrieve and Display the Product Label  To retrieve the product label from the modem router Cable Your Modem Router Cable the Modem Router in a Simple Network Cable Your Modem Router to a Router or Gateway  To cable your modem router To cable your modem router to a gateway or router Select Advanced Administration Router Mode Connect to the Network Access the Modem Router Wired Connection WiFi Connection To use WPS to connect to the WiFi network  To find and select the WiFi network Types of Logins Log In to the Modem Router To log in to the modem router Specify Initial Settings  To set up your Internet connection Notify Your Internet Provider Specify the Cable Connection Starting Frequency  To change the starting frequencySelect Cable Connection View Modem Router Initialization  To view the status of the modem router initialization Specify the Internet Connection Settings  To specify the Internet connection settingsSelect Advanced Setup Internet Setup Specify Initial Settings Control Access to the Internet Set Up Parental Controls  To set up Live Parental ControlsSelect Parental Controls Control Access to the Internet Use Keywords to Block Internet Sites Click the Take me to the status screen button To block Internet sites Select Advanced Security Block Sites Click the Add Keyword button To delete keywords from the list Block Services from the Internet  To block servicesSelect Advanced Security Block Services Schedule When to Block Internet Sites and Services Avoid Blocking on a Trusted Computer  To schedule blockingSelect Advanced Security Schedule  To specify a trusted computer Set Up Security Event Email Notifications  To set up email notifications Control Access to the Internet Modem Router Access a USB Drive on the Network USB Drive Requirements To connect a USB drive Control Access to the USB Drive  To specify the USB access settings To map the USB device to a Windows network drive Select Advanced USB Storage Advanced Settings Network Neighborhood/MacShare. Enabled by default  To set up FTP access Use FTP Within the Network View or Change Network Folders on a USB Drive  To view or change network folders Add a Network Folder on a USB Drive  To add a network folderSelect Advanced ReadySHARE Click the Create Network Folder button Edit a Network Folder on a USB Drive Approve USB Devices To edit a network folder  To approve USB devices Select Advanced Advanced Setup USB Settings Click the Approved Devices buttonSelect the Allow only approved devices check box Select USB Storage Basic Settings Safely Remove a USB Drive To remove a USB disk drive safely Specify Network Settings View or Change the WAN Settings  To view or change the WAN settingsSelect Advanced Setup WAN Setup Change the MTU Size  To change the MTU size Common MTU sizes Set Up a Default DMZ Server  To set up a default DMZ server Change the LAN TCP/IP Settings Select Advanced Setup LAN SetupChange the Modem Router’s Device Name  To change the modem router’s device name  To change the LAN TCP/IP settings Specify the IP Addresses That the Modem Router Assigns Reserve LAN IP Addresses  To reserve an IP address  To edit a reserved address entry  To delete a reserved address entry Use the WPS Wizard for WiFi Connections Specify Basic WiFi Settings To use the WPS Wizard Select Advanced WPS Wizard  To specify basic wireless settings Change the WiFi Security Option  To change the WPA settings Set Up a WiFi Guest Network  To set up a guest network Select Guest Network Control the Wireless Radios Use the WiFi On/Off ButtonEnable or Disable the Wireless Radios  To enable or disable the wireless radios Specify WPS Settings Select Advanced Advanced Setup Wireless Settings To specify WPS settings Set Up a Wireless Card Access List  To set up wireless card access Click the Set Up Access List button  To set up Dynamic DNS Select Advanced Advanced Setup Dynamic DNSSelect the Use a Dynamic DNS Service check box Dynamic DNS  To enable Universal Plug and Play Select Advanced Advanced Setup UPnPImprove Network Connections with Universal Plug and Play  To refresh the information in the UPnP Portmap Table Manage Your Network View Modem Router Status View Cable Information To view modem router status and usage information  To view modem router cable information View Internet Port Information  To view modem router Internet port information Reboot the Modem Router Wireless Settings To view wireless settings  To reboot the modem router Change the Router Mode  To change the router mode View Logs of Modem Router Activity  To view and customize logs Select Advanced Administration Logs View a Network Map To view the network map Manage the Modem Router Configuration File Back Up SettingsSelect Advanced Administration Network Map  To back up the modem router’s configuration settings Restore Configuration Settings Erase the Current Configuration SettingsSelect Advanced Administration Backup Settings  To restore configuration settings that you backed up Change the admin Password  To erase the configuration settings To set the password for the user name admin Select Advanced Administration Set Password Select Advanced Administration Event Log View Event LogsRun the Ping Utility  To view the event logs  To run a ping test Select Advanced Administration Diagnostics Run the Traceroute Utility To run a traceroute test View Wireless Access Points in Your Area View or Change the Modem Router Wireless Channel To manage your wireless access point AP Select Advanced Administration Wireless AP  To view or change your wireless channel Select Advanced Administration Wireless ChannelRemote Management  To set up remote management  To use remote access Specify Internet Port Settings Set Up Port Forwarding to a Local Server  To forward specific incoming protocols Add a Custom Port Forwarding Service  To add a custom serviceClick the Add Custom Service button Edit a Port Forwarding Service Delete a Port Forwarding Entry To edit a port forwarding entry  To delete a port forwarding entry How the Modem Router Implements the Port Forwarding Rule Application Example Make a Local Web Server Public To make a local web server public Set Up Port Triggering Add a Port Triggering Service To add a port triggering service Specify Internet Port Settings Specify When to Use Port Triggering  To specify when to use port triggeringClick the Apply button Application Example Port Triggering for Internet Relay Chat Troubleshooting Use LEDs to Troubleshoot Cannot Log In to the Modem Router Troubleshoot a TCP/IP Network Using a Ping Utility Troubleshoot the Cable Internet Connection Use Ping to Test the LAN Path to Your Modem Router Ping Reply from IP address bytes=32 time=NN ms TTL=xxx Supplemental Information Factory Default Settings Factory default settings Technical Specifications AC1750 WiFi Cable Modem Router Factory default settings