Select Advanced Advanced Setup USB Settings | NETGEAR C6300 instruction

AC1750 WiFi Cable Modem Router

The BASIC Home screen displays.

4.Select ADVANCED > Advanced Setup > USB Settings.

By default the Enable any USB Device connection to the USB port Yes radio button is selected. This setting lets you connect and access all your USB drives.

5.Select the No radio button.

6.Click the Approved Devices button.

The approved and available USB devices display.

7.In the Available USB Devices list, select the drive that you want to approve.

8.Click the Add button.

9.Select the Allow only approved devices check box.

10.Click the Apply button. Your change takes effect.

11.To work with another USB device, first click the Safely Remove USB Device button for the currently connected USB device. Connect the other USB device, and repeat this process.

Share a USB Drive Attached to the Modem Router

41

Image 41

NETGEAR C6300 user manual Select Advanced Advanced Setup USB Settings, Click the Approved Devices button

Contents

AC1750 WiFi Cable Modem Router Trademarks SupportCompliance Contents Specify Network Settings Appendix a Supplemental Information Hardware Setup Front Panel Unpack Your Modem Router LED Position Your Modem Router Rear Panel  To retrieve the product label from the modem router Retrieve and Display the Product Label Cable the Modem Router in a Simple Network Cable Your Modem Router  To cable your modem router to a gateway or router Cable Your Modem Router to a Router or Gateway To cable your modem router Select Advanced Administration Router Mode Connect to the Network Access the Modem Router WiFi Connection Wired Connection To use WPS to connect to the WiFi network  To find and select the WiFi network  To log in to the modem router Types of LoginsLog In to the Modem Router Specify Initial Settings Notify Your Internet Provider  To set up your Internet connection Select Cable Connection Specify the Cable Connection Starting Frequency To change the starting frequency  To view the status of the modem router initialization View Modem Router Initialization Select Advanced Setup Internet Setup Specify the Internet Connection Settings To specify the Internet connection settings Specify Initial Settings Control Access to the Internet Select Parental Controls Set Up Parental Controls To set up Live Parental Controls Control Access to the Internet  To block Internet sites Use Keywords to Block Internet SitesClick the Take me to the status screen button  To delete keywords from the list Select Advanced Security Block SitesClick the Add Keyword button Select Advanced Security Block Services Block Services from the Internet To block services Schedule When to Block Internet Sites and Services  To schedule blocking Avoid Blocking on a Trusted ComputerSelect Advanced Security Schedule  To specify a trusted computer  To set up email notifications Set Up Security Event Email Notifications Control Access to the Internet Modem Router  To connect a USB drive Access a USB Drive on the NetworkUSB Drive Requirements  To map the USB device to a Windows network drive Control Access to the USB Drive To specify the USB access settings Network Neighborhood/MacShare. Enabled by default Select Advanced USB Storage Advanced Settings Use FTP Within the Network  To set up FTP access  To view or change network folders View or Change Network Folders on a USB Drive  To add a network folder Add a Network Folder on a USB DriveSelect Advanced ReadySHARE Click the Create Network Folder button Approve USB Devices Edit a Network Folder on a USB Drive To edit a network folder  To approve USB devices Select the Allow only approved devices check box Select Advanced Advanced Setup USB SettingsClick the Approved Devices button  To remove a USB disk drive safely Select USB Storage Basic SettingsSafely Remove a USB Drive Specify Network Settings Select Advanced Setup WAN Setup View or Change the WAN Settings To view or change the WAN settings  To change the MTU size Change the MTU Size Common MTU sizes  To set up a default DMZ server Set Up a Default DMZ Server Select Advanced Setup LAN Setup Change the LAN TCP/IP SettingsChange the Modem Router’s Device Name  To change the modem router’s device name  To change the LAN TCP/IP settings Specify the IP Addresses That the Modem Router Assigns  To reserve an IP address Reserve LAN IP Addresses  To delete a reserved address entry  To edit a reserved address entry Specify Basic WiFi Settings Use the WPS Wizard for WiFi Connections To use the WPS Wizard Select Advanced WPS Wizard  To specify basic wireless settings  To change the WPA settings Change the WiFi Security Option  To set up a guest network Set Up a WiFi Guest Network Select Guest Network Use the WiFi On/Off Button Control the Wireless RadiosEnable or Disable the Wireless Radios  To enable or disable the wireless radios  To specify WPS settings Specify WPS SettingsSelect Advanced Advanced Setup Wireless Settings  To set up wireless card access Set Up a Wireless Card Access List Click the Set Up Access List button Select Advanced Advanced Setup Dynamic DNS  To set up Dynamic DNSSelect the Use a Dynamic DNS Service check box Dynamic DNS Improve Network Connections with Universal Plug and Play  To enable Universal Plug and PlaySelect Advanced Advanced Setup UPnP  To refresh the information in the UPnP Portmap Table Manage Your Network View Cable Information View Modem Router Status To view modem router status and usage information  To view modem router cable information  To view modem router Internet port information View Internet Port Information Wireless Settings Reboot the Modem Router To view wireless settings  To reboot the modem router  To change the router mode Change the Router Mode  To view and customize logs View Logs of Modem Router Activity  To view the network map Select Advanced Administration LogsView a Network Map Back Up Settings Manage the Modem Router Configuration FileSelect Advanced Administration Network Map  To back up the modem router’s configuration settings Erase the Current Configuration Settings Restore Configuration SettingsSelect Advanced Administration Backup Settings  To restore configuration settings that you backed up  To erase the configuration settings Change the admin Password To set the password for the user name admin Select Advanced Administration Set Password View Event Logs Select Advanced Administration Event LogRun the Ping Utility  To view the event logs  To run a ping test  To run a traceroute test Select Advanced Administration DiagnosticsRun the Traceroute Utility View or Change the Modem Router Wireless Channel View Wireless Access Points in Your Area To manage your wireless access point AP Select Advanced Administration Wireless AP Remote Management  To view or change your wireless channelSelect Advanced Administration Wireless Channel  To set up remote management  To use remote access Specify Internet Port Settings  To forward specific incoming protocols Set Up Port Forwarding to a Local Server Click the Add Custom Service button Add a Custom Port Forwarding Service To add a custom service Delete a Port Forwarding Entry Edit a Port Forwarding Service To edit a port forwarding entry  To delete a port forwarding entry  To make a local web server public How the Modem Router Implements the Port Forwarding RuleApplication Example Make a Local Web Server Public  To add a port triggering service Set Up Port TriggeringAdd a Port Triggering Service Specify Internet Port Settings Click the Apply button Specify When to Use Port Triggering To specify when to use port triggering Application Example Port Triggering for Internet Relay Chat Troubleshooting Cannot Log In to the Modem Router Use LEDs to Troubleshoot Troubleshoot the Cable Internet Connection Troubleshoot a TCP/IP Network Using a Ping Utility Ping Use Ping to Test the LAN Path to Your Modem Router Reply from IP address bytes=32 time=NN ms TTL=xxx Supplemental Information Factory default settings Factory Default Settings AC1750 WiFi Cable Modem Router Factory default settings Technical Specifications