Manuals / NETGEAR / Computer Equipment / Network Router

NETGEAR C6300 user manual Reboot the Modem Router, Wireless Settings,  To view wireless settings

Models: C6300

1 98

Download 98 pages 53.09 Kb

Page 68

AC1750 WiFi Cable Modem Router

•Domain Name Server. The IP address of the Domain Name Server.

Wireless Settings

To view wireless settings:

1.Launch a web browser from a computer or wireless device that is connected to the network.

2.Type http://routerlogin.net or http://192.168.0.1. A login screen displays.

3.Enter the modem router user name and password.

The user name is admin. The default password is password. The user name and password are case-sensitive.

The BASIC Home screen displays.

4.Select ADVANCED.

The Wireless Settings (2.4 GHz) and Wireless Settings (5 GHz) panes display the following information:

•Name (SSID). The wireless network name (SSID) that the modem router uses.

•Region. The geographic region where the modem router is being used. It is illegal to use the wireless features of the modem router in some parts of the world.

•Channel. The operating channel of the wireless port being used. The default channel is Auto. When Auto is selected, the modem router finds the best operating channel available.

•Mode. The wireless communication mode: Up to 54 Mbps, Up to 145 Mbps (default), orUp to 300 Mbps.

•Wireless AP. Indicates whether the modem router WiFi radios are on or off. If the wireless radios are turned off, the WiFi On/Off LED on the front panel is off.

•Broadcast Name. Indicates whether the modem router is broadcasting its SSID.

•Wi-Fi Protected Setup. Indicates whether Wi-Fi Protected Setup is configured for this network.

Reboot the Modem Router

Rebooting the modem router disconnects all computers and mobile devices from the modem router’s network.

To reboot the modem router:

1.Launch a web browser from a computer or wireless device that is connected to the network.

2.Type http://routerlogin.net or http://192.168.0.1.

Manage Your Network

68

Image 68

NETGEAR C6300 Reboot the Modem Router, Wireless Settings,  To view wireless settings,  To reboot the modem router

Contents

AC1750 WiFi Cable Modem Router Trademarks SupportCompliance Contents Specify Network Settings Appendix a Supplemental Information Hardware Setup Unpack Your Modem Router Front PanelLED Rear Panel Position Your Modem RouterRetrieve and Display the Product Label  To retrieve the product label from the modem routerCable Your Modem Router Cable the Modem Router in a Simple Network To cable your modem router to a gateway or router Cable Your Modem Router to a Router or Gateway To cable your modem router Select Advanced Administration Router Mode Connect to the Network Access the Modem Router Wired Connection WiFi Connection To use WPS to connect to the WiFi network  To find and select the WiFi network To log in to the modem router Types of LoginsLog In to the Modem Router Specify Initial Settings  To set up your Internet connection Notify Your Internet ProviderSelect Cable Connection Specify the Cable Connection Starting Frequency To change the starting frequency View Modem Router Initialization  To view the status of the modem router initializationSelect Advanced Setup Internet Setup Specify the Internet Connection Settings To specify the Internet connection settings Specify Initial Settings Control Access to the Internet Select Parental Controls Set Up Parental Controls To set up Live Parental Controls Control Access to the Internet  To block Internet sites Use Keywords to Block Internet SitesClick the Take me to the status screen button  To delete keywords from the list Select Advanced Security Block SitesClick the Add Keyword button Select Advanced Security Block Services Block Services from the Internet To block services Schedule When to Block Internet Sites and Services Avoid Blocking on a Trusted Computer  To schedule blockingSelect Advanced Security Schedule  To specify a trusted computerSet Up Security Event Email Notifications  To set up email notificationsControl Access to the Internet Modem Router  To connect a USB drive Access a USB Drive on the NetworkUSB Drive Requirements  To map the USB device to a Windows network drive Control Access to the USB Drive To specify the USB access settings Select Advanced USB Storage Advanced Settings Network Neighborhood/MacShare. Enabled by default To set up FTP access Use FTP Within the NetworkView or Change Network Folders on a USB Drive  To view or change network foldersAdd a Network Folder on a USB Drive  To add a network folderSelect Advanced ReadySHARE Click the Create Network Folder buttonEdit a Network Folder on a USB Drive Approve USB Devices To edit a network folder  To approve USB devicesSelect the Allow only approved devices check box Select Advanced Advanced Setup USB SettingsClick the Approved Devices button  To remove a USB disk drive safely Select USB Storage Basic SettingsSafely Remove a USB Drive Specify Network Settings Select Advanced Setup WAN Setup View or Change the WAN Settings To view or change the WAN settings Change the MTU Size  To change the MTU sizeCommon MTU sizes Set Up a Default DMZ Server  To set up a default DMZ serverChange the LAN TCP/IP Settings Select Advanced Setup LAN SetupChange the Modem Router’s Device Name  To change the modem router’s device name To change the LAN TCP/IP settings Specify the IP Addresses That the Modem Router Assigns Reserve LAN IP Addresses  To reserve an IP address To edit a reserved address entry  To delete a reserved address entryUse the WPS Wizard for WiFi Connections Specify Basic WiFi Settings To use the WPS Wizard Select Advanced WPS Wizard To specify basic wireless settings Change the WiFi Security Option  To change the WPA settingsSet Up a WiFi Guest Network  To set up a guest networkSelect Guest Network Control the Wireless Radios Use the WiFi On/Off ButtonEnable or Disable the Wireless Radios  To enable or disable the wireless radios To specify WPS settings Specify WPS SettingsSelect Advanced Advanced Setup Wireless Settings Set Up a Wireless Card Access List  To set up wireless card accessClick the Set Up Access List button  To set up Dynamic DNS Select Advanced Advanced Setup Dynamic DNSSelect the Use a Dynamic DNS Service check box Dynamic DNSImprove Network Connections with Universal Plug and Play  To enable Universal Plug and PlaySelect Advanced Advanced Setup UPnP  To refresh the information in the UPnP Portmap Table Manage Your Network View Modem Router Status View Cable Information To view modem router status and usage information  To view modem router cable informationView Internet Port Information  To view modem router Internet port informationReboot the Modem Router Wireless Settings To view wireless settings  To reboot the modem routerChange the Router Mode  To change the router modeView Logs of Modem Router Activity  To view and customize logs To view the network map Select Advanced Administration LogsView a Network Map Manage the Modem Router Configuration File Back Up SettingsSelect Advanced Administration Network Map  To back up the modem router’s configuration settingsRestore Configuration Settings Erase the Current Configuration SettingsSelect Advanced Administration Backup Settings  To restore configuration settings that you backed upChange the admin Password  To erase the configuration settings To set the password for the user name admin Select Advanced Administration Set PasswordSelect Advanced Administration Event Log View Event LogsRun the Ping Utility  To view the event logs To run a ping test  To run a traceroute test Select Advanced Administration DiagnosticsRun the Traceroute Utility View Wireless Access Points in Your Area View or Change the Modem Router Wireless Channel To manage your wireless access point AP Select Advanced Administration Wireless APRemote Management  To view or change your wireless channelSelect Advanced Administration Wireless Channel  To set up remote management  To use remote access Specify Internet Port Settings Set Up Port Forwarding to a Local Server  To forward specific incoming protocolsClick the Add Custom Service button Add a Custom Port Forwarding Service To add a custom service Edit a Port Forwarding Service Delete a Port Forwarding Entry To edit a port forwarding entry  To delete a port forwarding entry To make a local web server public How the Modem Router Implements the Port Forwarding RuleApplication Example Make a Local Web Server Public  To add a port triggering service Set Up Port TriggeringAdd a Port Triggering Service Specify Internet Port Settings Click the Apply button Specify When to Use Port Triggering To specify when to use port triggering Application Example Port Triggering for Internet Relay Chat Troubleshooting Use LEDs to Troubleshoot Cannot Log In to the Modem RouterTroubleshoot a TCP/IP Network Using a Ping Utility Troubleshoot the Cable Internet ConnectionUse Ping to Test the LAN Path to Your Modem Router PingReply from IP address bytes=32 time=NN ms TTL=xxx Supplemental Information Factory Default Settings Factory default settingsTechnical Specifications AC1750 WiFi Cable Modem Router Factory default settings