Kodak Series 3 manual Print button/light Light status Cause Action/solution

www.kodak.com/go/support

Troubleshooting

Print button/light

Light status	Cause	Action/solution
Light glows steady	The printer dock is ready for	None required.
green	printing.
Light blinks green	The printer dock is printing.
Light is off	There are no pictures in the	None required.
	camera or on the card.	To enable Print:
	The camera is not docked or a	1 Take pictures.
	compatible Kodak card reader is	2 Dock the camera, or connect a
	not connected.	compatible Kodak card reader
		(page 14). If using a card
		reader, make sure a memory
		card is inserted.
	The camera is not properly seated	Reseat the camera on the printer
	on the connector.	dock (page 10).
	The camera or card reader is	None required.
	transferring pictures to the	When transfer is complete, press
	computer, or has established an	the blinking Transfer button,	.
	active connection to the
	computer.
	A PictBridge compatible device is	None required.
	connected.	The Print button is disabled; print
		command is controlled from the
		PictBridge compatible device. To
		print from another source, unplug
		the PictBridge compatible device.

44