Kodak Series 3 manual Paper light Light status Cause Action/solution

Troubleshooting

Paper light

Light status Cause Action/solution

IMPORTANT: The color cartridge may lock in place if there is a paper error. Do not attempt to remove the cartridge without first clearing the paper error. Make sure the Paper light is off before attempting to remove the cartridge.

Light is off	The paper tray is properly installed and	None required.
	has an ample supply of paper.
Light blinks	There is a paper jam.	Clear the jam (page 34), then press
amber		.
	Printing stopped during mid-print; the	Remove loose paper. Check the
	paper may be damaged or is missing	paper supply. Reload with new
	removable tabs (page 35).	paper if necessary, then press .
Light glows	The paper tray is empty.	Load paper (page 6), then press .
steady amber
	The paper tray is not installed or is	Remove the paper tray, check that
	improperly installed.	paper is properly loaded, and
		re-install (page 7). Press	to
		resume printing.
	Paper did not feed; removable tabs may	Check the paper supply. Reload
	be missing or sheets may be stuck	with new paper if necessary, then
	together (page 33).	press .
	The paper feed roller may be dirty.	Clean the paper feed roller
		(page 31).

42 www.kodak.com/go/support