Kodak V1253 manual Direct printing PictBridge enabled printer problems, Turn the flash off see

Troubleshooting

	Status	Solution
	Picture is too light	■ Reposition the camera to reduce the amount of available light.
		■ Turn the flash off (see page 9).
		■ Move so that the distance between you and the subject is within the
		effective flash range. (See camera specifications starting on
		page 57.)
		■ To automatically set exposure and focus, press the Shutter button
		halfway. When the framing marks turn green, press the Shutter
		button completely down to take the picture.
		■ In Auto and SCN-Custom modes, adjust the Exposure Compensation
		(see page 39).
Direct printing (PictBridge enabled printer) problems
	Status	Solution
	Cannot find the	■ Make sure you’re not in Favorites mode.
	desired picture	■ Use the Direct print menu to change the image storage location.
	The Direct print menu	■ Press any camera button to redisplay the menu.
	interface turns off
	Cannot print pictures	■ Make sure there is a connection between the camera and the
		printer (see page 48).
		■ Make sure the printer and the camera have power.
	Camera or printer	■ Follow the prompts to resolve the issue.
	display an error
	message

54 www.kodak.com/go/support