Troubleshooting

www.kodak.com/go/support 43

Flash does not fire Check the flash setting, and change as needed (page19).
NOTE: The flash does not fire in all modes.
Storage location is
almost or entirely full
Transfer the pictures to the computer (page12).
Delete pictures from the card or insert a new card.
Change the image storage location to internal memory
(page32).
Battery life is short Make sure the correct battery type is installed (page55).
Wipe the contacts with a clean, dry cloth before inserting a
battery in the camera. See page55.
Insert a new or charged battery (page1).
You cannot take a
picture
Turn the camera off, then on again. Make sure the camera is not
in Favorites mode.
Depress the Shutter button all the way (page5).
Insert a new or charged battery (page1).
Wait until the Ready light turns green before taking another
picture.
Memory is full. Transfer pictures to the computer (page12),
delete pictures (page11), change image storage location, or
insert another card.
Error message appears
on the LCD
Turn the camera off, then on again.
Remove the memory card.
Remove the battery. Wipe the contacts with a clean, dry cloth
(page55).
Insert a new or charged battery (page1).
If the problem still exists, get help (page47).
Memory card not
recognized or the
camera freezes with
the card.
Card may be corrupted. Format the card in the camera (Format,
page35).
Use another memory card.
Status Solution