Troubleshooting

Computer/connectivity problems

 

 

 

 

 

 

Status

 

Solution

 

 

Computer does not

 

Make sure the battery is charged and installed correctly (page 1).

 

 

communicate with

 

Turn on the camera.

 

 

the camera

 

Make sure the USB cable model U-8 is connected to the camera

 

 

 

 

 

 

 

 

and the computer (page 43). (If using an EasyShare dock, check

 

 

 

 

all cable connections. Make sure the camera is seated on the

 

 

 

 

dock.)

 

 

 

 

Make sure EasyShare software is installed (page 42).

 

 

 

 

 

 

 

Pictures do not

 

See Help in EasyShare software.

 

 

transfer to computer

 

 

 

 

 

 

 

 

 

Slide Show does not

 

Adjust the camera Video Out setting (NTSC or PAL, page 33).

 

 

run on an external

 

Make sure the external device settings are correct. (See the

 

 

video device

 

device’s user’s guide).

 

 

 

 

 

 

Picture quality problems

 

 

 

 

 

 

Status

Solution

 

 

Picture is not clear

To automatically set exposure and focus, press the Shutter button

 

 

 

 

halfway. When the framing marks turn green, press the Shutter

 

 

 

 

button completely down to take the picture.

 

 

 

Clean the lens (page 60).

 

 

 

Make sure the camera is not in Macro mode if you are more than

 

 

 

 

27.6 in. (70 cm) from your subject.

 

 

 

Place the camera on a flat, steady surface or use a tripod (especially

 

 

 

 

in high-zoom settings or in low light).

 

 

 

 

 

 

www.kodak.com/go/support

49

Page 55
Image 55
Kodak V603 manual Computer/connectivity problems