Installing the Hardware
Part No. 1H9613 June 1997 2-1
2 Installing the Hardware
You may choose to have Kodak Service install the Network
Interface Card in the printer for a fee. This fee covers hardware
installation only; network setup tasks are still your responsibility.
If you want to install the Network Interface Card yourself,
instructions are provided in this section. You are responsible,
however, for any damage that occurs if you install the Network
Interface Card yourself.
NOTE:
The Kodak Digital Science
TM
Desktop Color Proofer
9000 is shipped with its own user’s guide for the Network
Interface Card. Refer to that guide for hardware
configuration details, illustrations of the proofer, and
instructions for using the operator control panel.
Package Contents
The following items are included in the package for the Network
Interface Card. This package does not include Macintosh or
Windows PostScript drivers or Raster export modules. This
software is included with the purchase of each printer.
• Network Interface Card
• 3.5 inch diskette - Utilities for Novell NetWare
• 3.5 inch diskette UNIX TCP/IP Utilities.
NOTE: This UNIX tar formatted disk cannot be read on a PC
platform.
• antistatic strap
• User’s Guide
• 2 labels with the Ethernet hardware address
Requirements
To install the Network Interface Card, you need the following:
• appropriate Ethernet cabling
• Phillips-head screwdriver