www.kodak.com/go/support 7
2Installing, setting up software
Before you can share pictures/videos, you must:
■Install the KODAK Share Button App on your computer
See Installing the Share Button App (below) and
■Perform a one-time setup of your email and social networking site credentials (user
IDs and passwords). The email addresses and sites that you choose will appear on
your camera when you press the Share button.
See Setting up the Share Button App (one-time setup), page 8
Installing the Share Button App
IMPORTANT:
Until you install and set up the Share Button App, the camera Share button
is not enabled.
1Make sure the computer is connected to the Internet.
2Turn off the camera.
3Using the USB cable, connect the camera to a
computer USB port. Then turn on the camera.
The Camera Setup App runs. (If there are many
pictures on your memory card, this step could take
several minutes.)
4Watch your computer—when the Camera Setup
App prompts you to install the Share Button App,
click Install Now. (If you are prompted to allow the
Camera Setup App to run, click Allow.)
5When prompted, click Finish.
If you successfully installed the software
See “Setting up the Share Button App (one-time setup)” on page8.