Troubleshooting

www.kodak.com/go/support 55

Picture quality problems
Slide Show does not
run on an external
video device.
■Adjust the camera Video Out setting to NTSC or PAL (see
page46 ).
■Make sure the external device settings are correct. (See the
device’s user guide.)
Computer does not
communicate with
the camera.
■Turn off the camera, then turn it back on.
■Make sure the batteries are charged and installed correctly (see
page2 ).
■Make sure the KODAK Camera USB Cable, Micro B / 5-Pin is
connected to the camera and the computer (see page36). Then
turn on the camera.
Status Solution
Picture is not clear. ■To automatically set exposure and focus, press the Shutter button
halfway. When the Focus brackets turn green, press the Shutter
button completely down to take the picture.
■Clean the lens (see page61).
■Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
■Use a larger picture size (see page45).
■If you’re manually adjusting the ISO speed, realize that high a ISO
setting may cause grainy pictures.
Status Solution