Troubleshooting

www.kodak.com/go/support 57

Direct printing (PICTBRIDGE enabled printer) problems
Eye-Fi Endless Memory
is not working.

CAUTION:

If you’re using an Eye-Fi Card in this camera,

it’s critical that you disable (don’t turn on)

Endless Memory Mode in Eye-Fi Center

Software.

Eye-Fi Card gets warm. ■This is normal.
Camera battery life is
shorter.
■Battery life is reduced when using an Eye-Fi Card.
Transferring pictures is
slow using the Eye-Fi
Card.
■For the best reception when transferring pictures to a computer
or mobile device, the rear (LCD side) of the camera should face
the Wi-Fi access point.
Status Solution
Cannot find the
desired picture.
■Use the Direct printing menu to change the image storage location.
The Direct printing
menu interface turns
off.
■Press any camera button to redisplay the menu.
Cannot print pictures. ■Make sure there is a connection between the camera and the
printer (see page48).
■Make sure the printer and the camera have power.
Camera or printer
displays an error
message.
■Follow the prompts to resolve the issue.
Status Solution