56 www.kodak.com/go/support
Troubleshooting
Eye-Fi problems
Picture is too dark. ■Reposition the camera for more available light.
■Use Fill flash (see page14 ) or change your position so light is not
behind the subject.
■Move so that the distance between you and the subject is within the
effective flash range. (See Specifications, starting on page59.)
■To automatically set exposure and focus, press the Shutter button
halfway. When the Focus brackets turn green, press the Shutter
button completely down to take the picture.
■In Program AE mode, adjust the Exposure Compensation (see
page21).
Picture is too light. ■Reposition the camera to reduce the amount of available light.
■Turn the flash off (see page14).
■Move so that the distance between you and the subject is within the
effective flash range. (See Specifications, starting on page59.)
■To automatically set exposure and focus, press the Shutter button
halfway. When the Focus brackets turn green, press the Shutter
button completely down to take the picture.
■In Program AE mode, adjust the Exposure Compensation (see
page21).
Status Solution
Get support for Eye-Fi
Cards and Software.
Go to support.eye.fi
Eye-Fi Card is not
working in this
camera.
■Choose an Eye-Fi X2 Card or higher with a firmware version of
4.5174 or higher. (View and update firmware using the Eye-Fi
Center Software that accompanies the card.)
■The camera must be turned on to transfer pictures to the
computer or mobile device.
Status Solution