Troubleshooting
www.kodak.com/go/support 43
Picture quality problemsPictures do not
transfer to computer
■Click the Help button in the EasyShare software.
Slide Show does not
run on an external
video device
■Adjust the camera Video Out setting (NTSC or PAL,
page31).
■Make sure the external device settings are correct (see the
device’s user’s guide).
If... Try one or more of the following
Picture is too dark
or underexposed
■Reposition camera for more available light.
■Use Fill flash (page22) or change your position so light is not
behind the subject.
■Move so that the distance between you and the subject is
within the effective flash range (page9).
■To automatically set exposure and focus, press the Shutter
button halfway. When the AF/AE indicator turns green, press
the Shutter button completely down to take the picture.
■Adjust exposure compensation (page33).
Picture is too light ■Reposition camera to reduce the amount of available light.
■Turn f las h off (page 22).
■Move so that the distance between you and the subject is
within the effective flash range (page9).
■To automatically set exposure and focus, press the Shutter
button halfway. When the AF/AE indicator turns green, press
the Shutter button completely down to take the picture.
■Use P mode to adjust the Exposure.
Picture is not clear ■To automatically set exposure and focus, press the Shutter
button halfway. When the AF/AE indicator turns green, press
the Shutter button completely down to take the picture.
■Clean the lens (page55).
■Make sure camera is not in Close-up mode if you are more
than 21 in. (0.7 m) from your subject.
■Place the camera on a flat, steady surface or use a tripod,
especially in high-zoom settings or in low light.
If... Try one or more of the following