Connect with the arrows pointing toward each other.
Battery
Holder
Connector
Solenoid
Connector
Valve Body
Assembly
Battery Holder
Battery
Battery Clip
Battery
Holder
Sensor Cable
4. Install the Battery
CAUTION: Risk of product damage. Verify the solenoid wire and sensor cable are not being pinched during assembly.
Position the sensor cable from the faucet up through the bottom of the battery holder.
Connect the sensor cable from the faucet to the female connector in the battery holder.
Insert the battery into the battery holder with the concave edge toward the battery holder, then close the battery clip.
Connect the battery holder connector to the solenoid connector with the arrows pointing directly toward each other.
Connect the battery holder to the valve body assembly.
6 | Kohler Co. |
