Kohler K-13453 Disassemble/Reassemble the Faucet, Temperature Lever, Back of Faucet, Screw Body

Temperature Lever

Temperature

Lever

Screw

Spring

Washer

Back of Faucet

Screw

Body

Disassemble/Reassemble the Faucet

NOTE: Cover the drain with the plastic cap (provided) or towel to avoid losing small parts during this procedure.

Disassemble

For K-13462, K-13468, and K-13474 only, use the 2.5 mm hex wrench provided to remove and retain the screw from the temperature lever. Remove and retain the temperature lever with the spring washer.

Remove and retain the screw from the back of the faucet.

IMPORTANT! Take care to avoid scratching the sensor lens when removing the spout.

Slide the spout forward and off the body.

Reassemble

Slide the spout over the body until the base of the spout is flush against the mounting surface.

Reinstall the screw into the back of the faucet.

1124215-5-C 4 Kohler Co.