Optional Temperature Limiting Adjustment (cont.)
Insert the handle at the desired maximum temperature. If the handle is inserted horizontally: This is the maximum hot temperature, where the water will be the same temperature as the water from the hot water supply. If the handle is inserted vertically (shown): This is the maximum cold temperature, where the water will be the same temperature as the water from the cold water supply.
NOTICE: Do not rotate the handle when reinstalling the screw.
Reinstall the spring washer into the handle, then attach the handle to the faucet.
Secure the handle to the faucet with the screw.
Adjust the Water Temperature Limit –
NOTE: If you install the
Using the handle, adjust the water to the desired temperature.
Using the 2.5 mm hex wrench provided, remove and retain the screw, spring washer, and handle.
Position the
8 | Kohler Co. |