| To Close |
| Pump Flush Assembly | |
|
|
| ||
| To Open Clamp |
|
| |
Pump | Clamp |
|
| |
|
|
| ||
Flush | To Open | Hose Clamps | ||
Assembly | ||||
Strain Relief | ||||
Clamp |
| |||
|
| |||
|
| Pump Flush | ||
|
|
| ||
|
|
| Assembly | |
| Flow |
|
| |
| Restrictor Rim |
|
| |
| Supply |
|
| |
| Hose | Jet Supply | ||
Rim |
| Hose | Jet Supply | |
Supply Hose |
| Hose | ||
|
|
| Rim Supply Hose | |
Replacing the Pump
Remove the Pump
NOTE: The pump has no serviceable parts. It is replaced as an assembly. Retain all parts for reuse unless otherwise directed.
Should replacement ever be necessary, perform the following steps:
Turn off the water.
Drain the tank by flushing.
Unplug the electrical cord for the toilet from the outlet.
Remove the tank cover.
Unplug the modular plug and cord from the back of the trip button.
NOTE: The larger upper hose is the jet hose and the lower smaller hose is the rim hose. Both hoses are attached to the pump by clamps. The upper hose is held in place in the tank by a fitting. The lower hose slides into a hole and is held in place by friction.
Loosen and remove the upper hose clamp by sliding the clamping heads apart.
Pull the lower rim supply hose out of the vitreous china hole.
Remove the upper jet rim hose from the pump and remove the pump with the lower rim hose attached.
Kohler Co. | 15 |
