7. CONNECT PUSH BUTTON
Put large flange through hole in lid. Screw retaining ring onto flange. Turn the screw inside the push button flange to secure tank lid to flush valve assembly. Make certain that the flush valve assembly is adjusted high enough that the button touches the assembly. See 6 . Put green and white push rods into corresponding holes and trim flush with the top of the flange. See Fig. 7 . Install flush buttons. See Fig. 8 .
7. 
6
78
3 | 4 | 1&1 1/2 tour |
|
5 | 6 |
7 | 8 |
|
1 
2
Fig. #7 
7
